Connect Tech PCIe/104 Manuál stáhnout pdf (Strana 6)

Connections

CAN-IB130/230/PCIe104 Manual, V1.0

(1) Turn the PC off and pull the power cord.

(2) Open the PC according to the instructions of the PC manufacturer and

determine a suitable slot. The CAN interface board is designed according

to the PC standard and can easily be installed into the corresponding slot.

Do not use force when inserting it.

(3) Be sure the interface is securely held in the PC.

(4) Close the PC; the hardware installation is now complete.

3 Connections

Figure 3-1 shows the position of the connectors which are described following.

Please note, depending on the type of CAN interface board used, it may be

that some interfaces are not available. A list of available CAN interface board

versions can be found on the IXXAT webpage.

Figure 3-1: Connectors on the CAN interface board

3.1 PCIe/104 connector

The pin assignment of the PCIe/104 connector was made according to the

"PCI/104-Express

and PCIe/104

Specification V2.01“.

Channel 4

CAN high speed

PCIe/104

connector

Channel 2

CAN high speed

Optional LIN

Channel 1

CAN high speed

Optional CAN low speed

Optional

PCI/104 Stack-Through

connector

Channel 3

CAN high speed

1 2 3 4 5 6 7 8 9 10

Žádné komentáře

Connect Tech PCIe/104 Manuál Strana 6