Connect Tech CPU Servisní příručka stáhnout pdf (Strana 180)

Configuration

CPU 317T: Technology Functions

4-104 A5E00251798-03

4.8.2 Configuration

In the Cams > Configuration dialog box, you can set the following items for the

"Cams" technology object:

• Output cam type: Position-based cams, time-based cams, or switching cams

• The system cycle in which the cam is calculated

• Reference values of the cam: setpoint or actual values

• Use of the cam as high-speed cam

Cams also take effect at non-homed axes.

Set the "Enable output" check box to assign a HW address and a logic operation to

the "Cam" technology object.

When output is disabled, the cam can be evaluated only in the software.

Žádné komentáře

Connect Tech CPU Servisní příručka Strana 180